Advertisement
TV screen
In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the
VCR is connected. If this happens, follow the steps below to change the video playback channel (RF
output channel) to remove the interference.
The picture with interference
EXT LINK TV ASPECT TV/TEXT
TRACKING/V-LOCK
3
CH
3
VOLUME
2
VIDEO Plus+
INDEX
INPUT SELECT
INPUT SELECT
PROG PLAY
PROG PLAY AUDIO
REC
5
ENTER
1
CH
The clear picture
Removing Interference
Removing Interference
VCR
Set the
VCR/TV
TV
1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
MENU
Press the
2
The RF output channel number is displayed on the
VCR display.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Press the
3
1
2
3
to select a channel number, which differs by 2 or 3 from
4
5
6
the present channel number. (For example, if the
7
8
9
original channel number was 28, enter 31.)
0
Set the RF output channel of the VCR to [- -] (RF OFF)
if the VCR is connected to the TV via the 21-pin Scart
CH
cable.
Press the numeric button or
[- -]. Skip step 4, if using a 21-pin Scart cable.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Retune your TV until you receive the Test pattern. It
4
may be necessary to repeat steps
you can see the Test pattern clearly.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5
Press the
switch to
VCR
.
MENU
button for more than 5 seconds.
Numeric
buttons or use the
0
Channel
...
21
68
(RF OFF)
2
ENTER
button to finish this setting.
- 6 -
Channel
button
Indication when the RF output
channel is 28 (example)
button to
display
Indication after changing the RF
output channel to 31 (example)
and
3
above until
On-Screen Display
VCR Ch:28
Test pattern indication
VCR display
VCR Ch:31
Test pattern indication
Advertisement
