Touch Panel Assembly - Panasonic TY-TP65P10S Operating Instructions Manual

Touch Panel Assembly

Lay the top, side and bottom units on the packaging cushions.
1
 Arrange the packaging cushions (6) on the
floor so that their arrows point in the same
direction.
 Set the top, side and bottom units inside the
grooves of the packaging cushions.
(The arrows on the right and the left units
should point toward the top unit.)
Caution
Touch panel projections can be damaged if
exposed, therefore lay panel parts in the packaging
cushions to assemble.
Lock the side units to the top unit.
2
 Align the projections on the panel
support plate of the top unit with the
holes on the left and right units.
 Lock the left and right units to the top
unit with mounting screws B (4).
Notes on Assembly
• The installation hole of mounting screw B differs for the left and right units.
• If the parts do not fit together properly, switch the left and right units and try again.
Lock the bottom unit to the side units.
3
 Align the projections on the panel support
plate of the bottom unit with the holes on
the left and right units.
 Lock the left and right units to the bottom
unit with mounting screws B (4).
8
Packaging
cushions
Bottom unit
Panel support plate
Mounting
screws B
Panel support plate
Mounting
screws B
Top unit
Top unit
Arrow
Arrow