Names And Functions; Mode Key - Panasonic CN-DV2300N Operating Instructions Manual

Names and Functions

Monitor/Navigation changeover switch
9
For Monitor Operation
(CY-VMR5800N, CQ-VA707N etc.) (Option)
Set to Monitor Mode.
POWER
●Turns the monitor into the stand-by
mode or power-on mode
(changeover).
VOL (Volume)
●Adjusts the volume. (Operative only
for the speakers that are embedded
in the monitor)
MODE
●Used to change the input source
Notes
●This remote control can also control some functions of the Panasonic monitors. Refer to each
monitor's operation instructions for details.
●
Switches the screen mode between navigation and others. If the monitor is switched to external input
while then the navigation system is in operation, the screen background colour may change to black.
See the Operation Instructions for Monitor operation details.
10
Joystick
Selects items
by tilting it up, down, right, and left.
Set to Navi mode.
LAST key
Returns to the previous screen.
ZOOM key
Changes the map scale.
( page 17)

MODE key

Switches the screen mode.
(See Note below)
VOICE key
Initiates vocal guidance
for route maneuvers.
Infrared transmitter
Navi
Monitor
Joystick
(Only for CQ-VA707N)
●Item selection
●Item adjustment
ENTER
(Only for CQ-VA707N)
●Executes the selected
item.
ASPECT
●Switches the aspect
ratio.