Automatic Distance Correction Check - Panasonic CN-DV2300N Operating Instructions Manual

Dvd mobile navigation system
Hide thumbs Also See for CN-DV2300N:
Table of Contents

Advertisement

●The mobile navigation system uses GPS data for distance correction. Make sure that
GPS signals are being received (checking for GPS reception is described on this page).
●Check GPS reception in an open area location.
3
Information appears
[Wiring Check Information]
displayed
Speed: vehicle speed
ACC Volt: car battery voltage (11 V to 16 V)
Speed Pulse: speed pulse emitted by the vehicle
Accuracy level: learning level of vehicle positioning accuracy
●The accuracy level is reset to "0".
[GPS Information] displayed

■Automatic distance correction check

In the following cases, drive the vehicle in an open area for approximately 30 minutes at a speed
of over 12.5 mph (20 kmph), while receiving GPS signals. This should be done after re-setting the
learning results from position correction (accuracy level) in order to improve the GPS distance
correction accuracy (with the GPS reception indicator illuminating on the map screen).
Refer to "Automatic Distance Correction" for details for distance correction for the items below
(
page 32).
1. When using the navigation system for the very first time after installing the system
2. When the navigation system is transferred to another vehicle
3. When the tyre pressure is changed, tyres are changed, tyres are shifted in rotation or a spare
tyre is used
4. When deleting the position correction learning results for some reason
Notes
●Do not start driving until the opening screen and caution screen close.
●The vehicle position indicator may disappear temporarily after the speed is increased
depending on the vehicle model. This is a normal phenomenon indicating that the system
is calculating the distance correction.
Satellite number
Latitude and longitude
of the current position
Current date and time
4
Check
Turn on the parking lights
●The [SIDE LIGHT] illuminates.
Apply the parking brake
●The [Parking brake] illuminates.
Put the gearshift lever in the
reverse position
●The [Reverse Light] illuminates.
The [GPS] illuminates
■To close these checks
■To return to the map screen
Drive the vehicle for approx.
30 minutes with the map
screen opened at a speed of
more than 12.5 mph(20 kmph).
■To return to the map screen
The Mobile Navigation System uses
input from three or more satellites and
calculates the vehicle position based on
the principle of triangulation.
(Confirmation only)
14
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents