Konica Minolta BIZHUB PRO C5500 User Manual page 392

8
8
Press [Start] on the control panel.
The following screen will be displayed to indicate that the machine is
now storing the image data in HDD.
When completed, the Image Store/Recall screen will be restored.
9
Select the desired overlaying image data.
– Touch the desired image data key to highlight it, then touch [OK].
The Stamp/Image Overlay screen will be restored.
10
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Stamp/Image Overlay function with the current
setting remained, touch [Function Off].
11
Touch [OK] on the Application screen.
The Copy screen will be restored, with highlighted [Stamp/Overlay] key
displayed under the [Application] key.
This key can also be used to display the Application screen for making
setting change.
The [Separate Scan] key on the Copy screen also appears highlighted
to show that the Separate Scan mode is automatically selected.
12
Position the original to be overlaid.
– Position the original either in the ADF or on the original glass.
13
Press [Start] to scan.
– Repeat steps 12 and 13 for all originals.
8-98
Application functions
bizhub PRO C5500