Others; Indications - Panasonic NV-DS88EN Operating Instructions Manual

Others

Indications

Various functions and the Movie Camera status are shown
on the screen.
r:
Remaining Battery Power
≥When the battery power becomes low, the Indication
changes. When the battery is discharged completely, the
u (v) Indication flashes.
s:
(When you are using the AC Adaptor, the
[s] Indication may appear, however,
this is not a malfunction.)
R0:45: Remaining Tape Time
≥Remaining tape time is indicated in minutes. (When it
reaches less than 3 minutes, the indication starts flashing.)
Cinema Mode ( l 71)
CINEMA:
Digital Zoom ( l 70)
D.ZOOM:
Wipe Mode ( l 75)
WIPE:
Mix Mode ( l 75)
MIX:
Strobe Mode ( l 75)
STROBE:
Gain-up Mode ( l 75)
GAINUP:
Trailing Effect Mode ( l 75)
TRACER:
Mosaic Mode ( l 75)
MOSAIC:
Mirror Mode ( l 75)
MIRROR:
Negative Mode ( l 75)
NEGA:
Sepia Mode ( l 75)
SEPIA:
Black & White Mode ( l 75)
B/W:
Solarisation Mode ( l 75)
SOLARI:
Playback Zoom ( l 79)
PB ZOOM:
SP: Standard Mode (Recording Speed Mode)
( l 67)
LP: Long Play Mode (Recording Speed Mode)
( l 67)
Index signal recording ( l 78)
INDEX:
Search Number ( l 78)
S 1:
Zoom Magnification Indication ( l 69)
5k:
Automatic Mode ( l 68)
AUTO:
Manual Mode ( l 72, 74)
MNL:
[: Image Stabilizer ( l 70)
Audio Dubbing Input Display ( l 80)
MIC, AV IN:
Audio Recording Mode ( l 67)
12 bit, 16 bit:
Automatic Printing ( l 82)
AUTOPRINT:
Manual Focus ( l 74)
MF:
ª: Back Light Mode ( l 71)
5: Sports Mode (Programme AE) ( l 72)
7: Portrait Mode (Programme AE) ( l 72)
4: Low Light Mode (Programme AE) ( l 72)
Ω: Spotlight Mode (Programme AE) ( l 72)
º: Surf & Snow Mode (Programme AE) ( l 72)
Recording ( l 68)
REC:
Recording Pause ( l 68)
PAUSE:
Playback ( l 76) /Forward Camera Search
!:
( l 68)
Reverse Camera Search ( l 68)
":
Still Playback ( l 77)
;:
%: Fast-forward/Cue Playback ( l 76)
Rewind/Review Playback ( l 76)
&:
~, }: Slow Motion Playback ( l 77)
Still Advance Playback ( l 77)
";, ;!:
*, ): Index Search ( l 78)
Recording Check ( l 68)
CHK:
A.DUB !: Audio Dubbing ( l 80)
A.DUB ;: Audio Dubbing Pause ( l 80)
Photoshot Mode Recording ( l 69)
PHOTO:
Blank Search ( l 77)
BLANK:
R !: Repeat Playback ( l 94)
Variable Speed Search ( l 76)
2k%:
1/500: When you adjust shutter speed manually,
this indication appears. ( l 74)
Slide Show Playback ( l 86)
SLIDE!:
Slide Show Playback Pause ( l 86)
SLIDE;:
Manual Slide Show Playback ( l 87)
M.SLIDE!:
Manual Slide Show Playback Pause ( l 87)
M.SLIDE;:
F2.4: When you adjust the F Number manually,
this indication appears. ( l 74)
Automatic White Balance Mode ( l 72)
AWB:
1: White Balance setting Mode ( l 72)
z: Outdoor Mode ( l 72)
{:
Indoor Mode (recording under incandescent
lamp) ( l 72)
Zoom Microphone ( l 69)
Z.MIC:
Wind Noise Reduction ( l 71)
WIND CUT:
æ: Progressive Photoshot Mode ( l 69)
Volume adjustment ( l 76)
VOLUME:
Date/Time Indication ( l 91)
15:30:45:
N (F, E): Card Photoshot Picture Quality (during Card
Photoshot recording) [F] means Fine, [N]
means Normal and [E] means Economy.
( l 84)
ø (Red): Card Photoshot Recording ( l 84)
ACCESS: While Card is being read (during Playback,
Formatting and Multi-Picture Function use).
( l 84)
¬: Card not inserted ( l 84)
ø(cyan):
Card Photoshot Recording preparation
completed ( l 84)
00: Remaining Number of Card Photoshot
pictures ( l 84)
Lock Setting ( l 89)
:
¥ (White):
DPOF Setting completed (set to 1 or more
picture) ( l 87)
¥ (Green): Slide Show Settings completed ( l 90)
¥ (Blue):
DPOF Setting (set to 1 or more picture)/
Slide Show Settings both completed
( l 87, 90)
: [640k480] Image size
640
≥For images not recorded with this Movie Camera, the size
display is determined as follows according to the number of
horizontal pixels.
: From 640 to 800 (The size is not displayed
640
at under 640 pixels.)
: From 800 to 1024
SVGA
: From 1024 to 1280
XGA
: From 1280 to 1600
SXGA
: Over 1600
UXGA
ª To Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, you can change the Counter Display Mode to
Tape Counter Indication [COUNTER] (0:00.00), Memory
Counter Indication [MEMORY] (M0:00.00), and Time Code
Indication [TIMECODE] (0h00m00s00f). ( l 63) By
repeatedly pressing the [COUNTER] Button on the Remote
Controller, you can change the Counter Display Mode.
ª To Display Date/Time Indication
To display Date/Time Indication, set the appropriate Date/
Time in [DATE/TIME] on the [DISPLAY SETUP] Sub-Menu.
( l 63)
You can also press the [DATE/TIME] Button of the Remote
Controller repeatedly to display or change the Date/Time
Indication.
91