Adjusting White Balance Manually - Panasonic NV-DS88EN Operating Instructions Manual

1
W T
1
1
2
PUSH
AUTO
W.B/SHUTTER/IRIS/VOL/JOG
3, 4, 5
MNL
1
10 000K
9 000K
8 000K
7 000K
4)
6 000K
5)
5 000K
6)
7)
4 000K
1)
8)
9)
3 000K
10)
11)
2 000K
12)
1 000K

Adjusting White Balance Manually

For light outside the functional Auto White Balance Adjustment range, use
the Manual White Balance Adjustment Mode.
1
Attach the Lens Cap and zoom in until the entire screen
becomes white.
2
Set the Mode Selector Switch to [MNL].
≥The [MNL] Indication appears.
3
Press the [PUSH] Dial.
≥The [AWB] Indication appears.
4
Turn the [PUSH] Dial until the [
5
Keep pressing [PUSH] Dial until the [
flashing.
To Resume Automatic Adjustment
MNL
Turn the [PUSH] Dial until the [AWB] Indication is displayed. Or, set the Mode
2
Selector Switch to [AUTO].
ª About White Balance Sensor
The White Balance Sensor
during recording.
≥Do not cover the White Balance Sensor with your hand during recording.
Otherwise, White Balance will not function normally.
≥The red light from the Tally Lamp
object, possibly causing the White Balance sensor to operate incorrectly
and changing the colouring.
Outside of the effective range of Automatic White Balance Adjustment, the
image will become reddish or bluish. Even within the effective range of
Automatic White Balance Adjustment, the Automatic White Balance
Adjustment may not function properly if there is more than one light source. In
2)
this case, adjust the White Balance.
3)
1) The effective range of Automatic White Balance Adjustment on this
Movie Camera
2) Blue sky
3) Cloudy sky (Rain)
4) TV screen
5) Sunlight
6) White fluorescent lamp
7) 2 hours after sunrise or before sunset
8) 1 hour after sunrise or before sunset
9) Halogen light bulb
10) Incandescent light bulb
11) Sunrise or sunset
12) Candlelight
≥For other notes concerning this item, see page 93.
1
] Indication is displayed.
1
] Indication stops
1
determines the nature of the light source
2
will be reflected off your hand or
73