Panasonic KX-FP207FX Operating Instructions Manual page 40

7. Programmable Features
Feature
Setting recall time
Changing the receiving
mode in the manual
answer setting
Setting the connecting
tone
Changing the receiving
mode in the AUTO
ANSWER setting (KX-
FP218 only)
Changing the TEL/FAX
delayed ring count
40
Feature code Selection
The recall time depends on your telephone exchange or host
{#}{7}{2}
PBX.
{1} "900ms"
{2} "700ms"
{3} "600ms" (default)
{4} "400ms"
{5} "300ms"
{6} "250ms"
{7} "200ms"
{8} "160ms"
{9} "110ms"
{*} "100ms"
{0} "90ms"
{#} "80ms"
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
{1} "TEL" (default): Telephone mode (page 24)
{#}{7}{3}
{2} "TEL/FAX": Telephone/Fax mode (page 25)
If you often have trouble when sending faxes, this feature allows
{#}{7}{6}
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party's machine.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party's machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
{1} "TAM/FAX" (default): Telephone Answering Machine/Fax
{#}{7}{7}
mode (page 26)
{2} "FAX ONLY": Fax only mode (page 25)
If you use an extension telephone in TEL/FAX mode, select the
{#}{7}{8}
desired number of times the extension telephone rings before the
unit answers the call.
{1} "1"
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"