Update Channel List - Panasonic TX-L42ET60E User Manual

Normally set Symbol Rate
●
2. Select Start scan
■
DVB-T
1. Select a channel with
channel
Set where the level of
●
2. Press OK to search
■
Analogue
Set Analogue channel manually after
Set Sound System
●
Normally set Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with /
4. Select Store with
Use Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●

Update Channel List

By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
and Service ID
with / and press
/ and adjust frequency with
Signal Quality
Auto
and Colour System, and then perform this function.
to Auto.
/ and press OK
to make small adjustments to the tuning of an individual
- 50 -
to Auto.
OK to search
/
becomes the maximum.
Setup.
to set
Favourites
for each
Edit,