Auto Power Standby Function; Aspect - Panasonic TX-L42ET60E User Manual

Ambient Sensor
(On / Off)
Automatic Brightness Control function
●
Adjusts picture settings automatically depending on ambient lighting
conditions.

Auto power standby function

The TV will automatically go into Standby mode in the following conditions:
Off Timer is active.
●
Watching
No operation is performed for 4 hours while
●
Settings
No signal is received and no operation is performed for 10 minutes while
●
No signal Power off
Settings

Aspect

Change the aspect ratio (image size) with ASPECT.
■
To change the aspect ratio manually
1. Display Aspect Selection
2. Select the mode with
You can also change the mode pressing ASPECT.
●
(Press repeatedly until you reach the desired mode.)
Auto:
The best ratio is selected automatically according to the "Aspect Control
Signal".
Watching
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
14:9:
Displays the image at the standard 14:9 without distortion.
Just:
Displays a 4:3 image full-screen. Stretching is only noticeable at the left
and right edges.
4:3:
Displays the image at the standard 4:3 without distortion.
Basic Off Timer
Timer Auto Standby
is set to On.
Timer No signal Power off
list with ASPECT
/ and press
For best picture Aspect Control Signal
- 29 -
Auto Standby is set to On.
OK to set