Custom - Wireless Access Point - Panasonic TX-L42ET60E User Manual

1) Select Proxy
2) Enter the address with
OK to set
3) Press BACK/RETURN
Proxy Port:
This number is also specified by the provider with the Proxy address.
1) Select Proxy Port
2) Enter the number with numeric buttons
3) Press BACK/RETURN
4. Select Network Status
Home network
5. Select Exit with

Custom - Wireless Access Point

You can use the TV as a wireless access point and connect the network
equipment without an access point.
Confirm the PIN code, network settings of the equipment before starting
●
setup. For details, read the manual of the equipment.
1. Display the menu with
2. Select Network
with / / /
3. Select Connect to device in WPS
To set manually, select
●
4. Select and set WPS(Push button)
access
WPS(Push button):
Set the equipment to WPS (Push button) mode. For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection has failed, check the settings and positions of the
●
with / and press
/ /
to store
with /
to store
with / and press
Network settings
/ and press OK to set
MENU
Network Connection
and press OK to access
with
Change settings. (see below)
/ WPS(PIN)
- 71 -
OK to access
/ or numeric buttons, and press
OK to access
Network Status
Custom Wireless Access Point
/ and press OK
with / and press
to access
OK to