Manual Tuning - Panasonic TX-L42ET60E User Manual

(DVB-C)
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency in your country.
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with numeric buttons.
After settings, select
●
3. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set Auto Setup with following control panel buttons
Move the cursor / select from a range of options / select the menu item
●
(up and down only)
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button.

Manual Tuning

Normally use Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial, use this function. (DVB)
All DVB channels found will be added to
●
■
DVB-C
1. Enter the frequency with numeric buttons
Symbol Rate and
Start scan with /
or Update Channel List
Channel
- 49 -
Network ID to Auto. If
and press OK to search.
OK to start Auto Setup
to retune DVB channels.
List.
Auto