Auto Setup - Panasonic TX-L42ET60E User Manual

■
Edit DVB / Analogue Channels
To swap / move the channel position (if available)
●
1) Press (green) to edit
2) Set the new position with
(green) to store
To retune each channel
●
(red)
– For Analogue mode
Watching
– Only for the revealed channels
To rename the channel name (Analogue)
●
1) Press (blue) to edit
2) Enter characters (maximum 5 characters) with
numeric buttons, and press
3) Press BACK/RETURN
= Note =
If a VCR is connected only with the RF cable in Analogue mode, edit VCR.
●

Auto Setup

Automatically retunes the channels received in the area.
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are
●
erased.
If Child Lock PIN number has been set, the PIN number is required.
●
Functions
If tuning has not been done completely, set
●
Watching
■
DVB-C, DVB-T, Analogue channels
1. Select Auto Setup
2. Set DVB-C Auto Setup Settings
/ or numeric buttons, and press
(Manual Tuning)
Tuning and editing channels
OK to set
to store
Child Lock PIN number
Tuning and editing channels
with / and press
with
- 48 -
Manual Tuning
/ /
Manual Tuning.
Manual Tuning
OK to access
/ / / and press
/ or
OK to store