TP-Link TL-R470T+ User Manual page 82

Interface:
Source:
Destination:
Effective Time:
Description:
Priority:
 List of Rules
You can view the information of the entries and edit them by the Action buttons. The smaller the value
is, the higher the priority is.
The first entry in Figure 4-43 indicates: The TELNET packets transmitted from the hosts within the
network of 192.168.0.0/24 will be not allowed to pass through the router at 8:00-20:00 from Tuesday to
Saturday.
Select interface for the entry. The entry will take effect when the
interface to which the data is flowing is selected. WAN or LAN refers
to all the WAN or LAN interfaces.
Select the Source IP Range for the entries, including the following
three ways:
IP/MASK: Enter an IP address or subnet mask. ("0.0.0.0/32"

means any IP).
Group: Select a predefined group of users. You can set the group

on4.4.1 Group.
ANY: means for any users.

Select the Destination IP Range for the entries, including the following
two ways:
IP/MASK: Enter an IP address or subnet mask. ("0.0.0.0/32"

means any IP is acceptable).
ANY: means for any users.

Specify the time for the entry to take effect.
Give a description for the entry.
Select this option to specify the priority for the added entries. The
latest enabled entry will be displayed at the end of the list by default.
-77-