Port Config - TP-Link TL-R470T+ User Manual

The following items are displayed on this screen:
 Rate Control
Port:
Ingress Limit:
Ingress Rate:
Egress Limit:
Egress Rate:
The first entry in Figure 4-16 indicates: The Ingress and Egress Limits are enabled for port 1. The
Ingress and Egress Rates are 1Mbps. That is, the receiving rate for all the ingress packets will not
exceed 1Mbps, and the transmitting rate for all the egress packets will not exceed 1Mbps.
4.3.4.4

Port Config

On this page, you can configure the basic parameters for the ports.
Choose the menu Network→Switch→Port Config to load the following page.
Figure 4-16 Rate Control
Displays the port number.
Specify whether to enable the Ingress Limit feature.
Specify the limit rate for the ingress packets.
Specify whether to enable Egress Limit feature.
Specify the limit rate for the egress packets.
-44-