TP-Link TL-R470T+ User Manual page 34

IP Address:
Subnet Mask:
Default Gateway:
Primary DNS/Secondary DNS:
Upstream
Bandwidth:
Downstream Bandwidth:
 L2TP Status
Status:
IP Address:
If Static IP is selected, configure the IP address of WAN port.
If Dynamic IP is selected, the IP address of WAN port
obtained is displayed.
If Static IP is selected, configure the subnet mask of WAN
port. If Dynamic IP is select, the subnet mask of WAN port
obtained is displayed.
If Static IP is selected, configure the default gateway. If
Dynamic IP is selected, the obtained default gateway is
displayed.
If Static IP is selected, configure the DNS. If Dynamic IP is
selected, the obtained DNS is displayed.
Specify the bandwidth for transmitting packets on the port.
Specify the bandwidth for receiving packets on the port.
Displays the status of L2TP connection.
"Disabled" indicates that the L2TP connection type is

not applied.
"Connecting" indicates that the router is obtaining the IP

parameters from your ISP.
"Connected" indicates that the router has successfully

obtained the IP parameters from your ISP.
"Disconnected" indicates that the connection has been

manually terminated or the router gets no response from
your ISP. Please ensure that your settings are correct
and your network is connected well. Consult your ISP if
this problem remains.
Displays the IP address assigned by your ISP.
-29-