TP-Link TL-R470T+ User Manual page 27

Get IP Address by
Unicast:
Use the following DNS
Server:
Primary DNS:
Secondary DNS:
Upstream Bandwidth:
Downstream
Bandwidth:
 Dynamic IP Status
Status:
IP Address:
Subnet Mask:
Gateway Address:
The broadcast requirement may not be supported by a few ISPs.
Select this option if you can not get the IP address from your ISP
even with a normal network connection. This option is not required
generally.
Select this option to enter the DNS (Domain Name Server) address
manually.
Enter the IP address of your ISP's Primary DNS (Domain Name
Server). If you are not clear, please consult your ISP.
Optional. If a Secondary DNS Server address is available, enter it.
Specify the bandwidth for transmitting packets on the port.
Specify the bandwidth for receiving packets on the port.
Displays the status of obtaining an IP address from your ISP.
"Disabled" indicates that the Dynamic IP connection type is not

applied.
"Connecting" indicates that the router is obtaining the IP

parameters from your ISP.
"Connected" indicates that the router has successfully obtained

the IP parameters from your ISP.
"Disconnected" indicates that the IP address has been

manually released or the router gets no response from your
ISP. Please check your network connection and consult your
ISP if this problem remains.
Displays the IP address assigned by your ISP.
Displays the Subnet Mask assigned by your ISP.
Displays the Gateway Address assigned by your ISP.
-22-