Wan Traffic Meter Show Command - NETGEAR ProSafe SRX5308 Cli Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv6 Connection Type: Dynamic IP (DHCPv6)
IPv4 Connection State: Not Yet Connected
IPv6 Connection State: Not Yet Connected
Link State: LINK DOWN
Upload Connection Speed: 1000000
Download Connection Speed: 1000000
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
Gateway (IPv6):
Primary DNS(IPv6):
Secondary DNS(IPv6):

WAN Traffic Meter Show Command

show system traffic_meter setup <wan interface>
This command displays the configuration of the traffic meter and the Internet traffic statistics.
For the WAN interface, type WAN1, WAN2, WAN3, or WAN4.
Enable Traffic Meter
____________________
Traffic Meter is Enabled
Limit Type Both Directions
Monthly Limit in (MB): 255000
Increase this month limit: Enabled
Increase limit by in (MB): 125000
This month limit:
Traffic Counter
________________
Traffic Counter: Specific Time
Restart Time (HH:MM-Day of Month): 12:0 AM - 1
Send e-mail before restarting: Enabled
When Limit is reached
______________________
Show Commands
306