Upnp Command; Security Upnp Configure - NETGEAR ProSafe SRX5308 Cli Reference Manual

UPnP Command

security upnp configure

This command configures Universal Plug and Play (UPnP). After you have issued the
security upnp configure command, you enter the security-config [upnp] mode, and
then you can configure one keyword and associated parameter or associated keyword at a
time in the order that you prefer.
Step 1 Format
Mode
Step 2 Format
Mode
Keyword (might consist of two
separate words)
enable
advertisement period
advertisement time_to_live number
Command example:
SRX5308> security upnp configure
security-config[upnp]> enable Y
security-config[upnp]> advertisement period 60
security-config[upnp]> advertisement time_to_live 6
security-config[upnp]> save
Related show command:
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
security upnp configure
security
enable {Y | N}
advertisement period <seconds>
advertisement time_to_live <number>
security-config [upnp]
Associated Keyword to
Select or Parameter to Type
Y or N
seconds
show security upnp setup
Security Mode Configuration Commands
Description
Enables or disables UPnP.
The advertisement period in seconds,
from 1 to 1440 seconds.
The advertisement time-to-live period in
hops, from 1 to 255 hops.
and show security upnp portmap
176