NETGEAR ProSafe SRX5308 Cli Reference Manual page 85

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword (might consist of two
separate words)
hosts_end_ip
hosts_group
bandwidth_allocation
outbound_min_bandwidth
outbound_max_bandwidth
inbound_min_bandwidth
inbound_max_bandwidth
Associated Keyword to
Select or Parameter to Type
ipaddress
Group1, Group2, Group3,
Group4, Group5, Group6,
Group7, or Group8
Shared or Individual
bandwidth
bandwidth
bandwidth
bandwidth
Net Mode Configuration Commands
85
Description
The end IP address if the hosts keyword
is set to IP-Address-Range.
Specifies the group if the hosts keyword
is set to Group.
Note: You cannot enter group names
that you have specified with the
lan_groups edit <row id>
<new group name> command.
Specifies how bandwidth is allocated.
These options apply when the hosts
keyword is set to IP-Address-Range or
to group.
• Shared. The bandwidth is shared
among all IP addresses in a range or all
members of a group.
• Individual. The bandwidth is allocated
to each IP address in the range or each
member of a group.
The outbound minimum bandwidth in
Kbps, from 0 to 100,000. This option
applies when the
direction_for_rate_control
keyword is set to outbound or both.
The outbound maximum bandwidth in
Kbps, from 100 to 100,000. This option
applies when the
direction_for_rate_control
keyword is set to outbound or both.
The inbound minimum bandwidth in Kbps,
from 0 to 100,000. This option applies
when the
direction_for_rate_control
keyword is set to inbound or both.
The inbound maximum bandwidth in
Kbps, from 100 to 100,000. This option
applies when the
direction_for_rate_control
keyword is set to inbound or both.
net lan