NETGEAR ProSafe SRX5308 Cli Reference Manual page 174

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Keyword
outgoing_start_port number
outgoing_end_port
incoming_start_port number
incoming_end_port
Command example:
SRX5308> security porttriggering_rules add
security-config[porttriggering-rules]> name Skype
security-config[porttriggering-rules]> enable_rule Y
security-config[porttriggering-rules]> protocol TCP
security-config[porttriggering-rules]> outgoing_start_port 61196
security-config[porttriggering-rules]> outgoing_end_port 61196
security-config[porttriggering-rules]> incoming_start_port 61197
security-config[porttriggering-rules]> incoming_end_port 61197
security-config[porttriggering-rules]> save
Related show command:
porttriggering_rules status
security porttriggering_rules edit <row id>
This command configures an existing port triggering rule. After you have issued the
security porttriggering_rules edit command to specify the row to be edited, you
enter the security-config [porttriggering-rules] mode, and then you can configure one keyword
and associated parameter or associated keyword at a time in the order that you prefer. You
cannot change the name of the rule.
Step 1 Format
security porttriggering_rules edit <row id>
Mode security
Associated Keyword to
Select or Parameter to Type
number
number
show security porttriggering_rules setup
Security Mode Configuration Commands
174
Description
The start port number (integer) of the outgoing
traffic range. Valid numbers are from 1025 to
65535.
The end port number (integer) of the outgoing
traffic range. Valid numbers are from 1025 to
65535.
The start port number (integer) of the incoming
traffic range. Valid numbers are from 1025 to
65535.
The end port number (integer) of the incoming
traffic range. Valid numbers are from 1025 to
65535.
and show security