Intended Use; Technical Data; Safety Information - Silvercrest KH 2352 Operating Instructions Manual

RADIO KH2352

Intended Use

This device is intended for the reception of FM/ AM
radio transmissions as well as for the playback of
audio signals from external devices. This device is
intended for use only in domestic environments.
It is not suitable for use in commercial or industrial
applications.

Technical Data

This consumer electronics device, being in con-
formity with their fundamental requirements
and directions, complies with the relevant re-
gulations of both the EMC Guidelines 2004/
108/EC and the Guidelines for Low Voltage
devices 2006/95/EC.
Power supply:
Power consumption:
Standby:
Output level:
Operating temperature range: +5°— +35°C
Humidity:
Measurements
(L x W x H):
Weight :
Protection class:
Audio input AUX:
3,5 mm Stereo jack plug socket
Radio frequency range:
Radio: MW (AM): 522 – 1620 KHz
VHF (FM): 87.5 - 108 MHZ
AC 230 V ~ 50 Hz
11 Watt
2.7 W
4 Watt RMS
5 — 90%
(no condensation)
145 x 235 x 127 mm
ca. 980 g
II /
Notice
The technical data of the device makes possible an
adjustable frequency range from 87,5 - 108 MHz
resp. 522 – 1620 kHz. In some countries, different
national regulations may apply to the assigned radio
frequency ranges. Please note that information received
outside of the assigned radio frequency ranges may
not be exploited, passed on to third parties or other-
wise misused.

Safety information

• This device is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
device is to be used.
• Children should be supervised to ensure that
they do not play with the device.
• Keep batteries well away from children. Children
can put batteries into their mouths and swallow
them. If a battery is swallowed medical assistance
must be sought immediately.
To avoid potentially fatal electric shocks:
• Connect the device only to correctly installed and
earthed mains sockets. Ensure that the rating of
the local power supply tallies completely with the
details given on the rating plate of the device.
• Ensure that the power cable never becomes wet
or damp during operation. Lay the cable so that
it cannot be trapped or otherwise damaged.
- 2 -