Time And Alarm Function - Silvercrest KH 2022 Operating Instructions Manual

c) Adjusting volume and sensitivity
• Set the desired volume level using the volume regulator "VOL"
• With FM reception you can make adjustments to the reception sensitivity.
Slide the switch "LOCAL/DX"
receive powerful local transmissions. In the position "DX" the receiver is
adjusted for worldwide reception.
d) Switching the display illumination on
• Hold the button "LIGHT"
nation.

Time and alarm function

The appliance can switch itself on under timed control, e.g. as an alarm func-
tion. The requirements are that the clock is correctly adjusted, an alarm time
is programmed in and the alarm function is switched on. Additionally,
a radio station should be selected and a sufficiently loud volume level be set.
Notice: To adjust the time and alarm settings the appliance must be
switched off.
a) Setting the clock
• To set the hour indicator, press and hold the button "TIME SET"
at the same time, press the button "HOUR"
• To set the minute indicator, press and hold the button "TIME SET"
at the same time, press the button "MIN"
b) Programming the alarm time
• To set the hour indicator, press and hold the button "AL.SET"
at the same time, press the button "HOUR"
• To set the minute indicator, press and hold the button "AL.SET"
at the same time, press the button "MIN"
to the position "LOCAL" if you only want to
pressed down to switch on the display illumi-
.
.
- 8 -
.
.
.
and,
and,
and,
and,