[PT670] SMART SETUP
The Smart setup screen assists you in making necessary
(Main unit only)
Turn on your TV and select the appropriate
video input mode (e.g. VIDEO 1, AV 1, HDMI,
etc.) to suit the connections to this unit.
≥ To change your TV's video input mode, refer
to its operating instructions.
≥ This remote control can perform some basic
TV operations (
Turn on the unit.
≥ When the Smart setup screen appears
automatically, skip step 2 and 3.
Show the Smart setup.
Would you like to start smart
Follow the messages and
make the settings.
right, Smart setup settings)
Finish Smart setup.
Smart setup settings
Select the language used on menu screen.
Select the aspect to suit your TV.
Listen to speaker output to confirm speaker connections.
≥Auto speaker setup
Adjust the speaker output level automatically. (
Make surround sound setting for speaker output.
Select the audio input connection from your TV.
For AUX connection (
9): Select "AUX".
For OPTICAL IN connection (
This will be the TV audio setting for VIERA Link "HDAVI Control". (
≥ If this unit is connected to a "HDAVI Control 3 or later" compatible TV
via HDMI cable, the menu language and TV aspect information will be
retrieved via VIERA Link.
≥ If this unit is connected to a "HDAVI Control 2" compatible TV via
HDMI cable, the menu language information will be retrieved via
≥ Settings in the Smart setup can also be changed in the player settings
[e.g. language, TV aspect, speaker level and TV audio (
∫ Adjusting the speaker output level automatically:
Auto speaker setup
The speaker level settings can be optimized to accommodate your
room's listening conditions so that you can enjoy the ideal surround
Keep as quiet as possible during the Auto speaker setup. Loud
voices, air-conditioning noise, or excessive wind may lead to incorrect
settings. The speakers output loud test signals during setup.
≥ Place the Auto speaker setup microphone at actual seating position.
(At ear level when seated.)
≥ The test signal is output from each speaker.
Auto speaker setup can be activated through Smart setup only.
9): Select "DIGITAL IN".