Use your blender for soups,
Children should be supervised to
sauces, drinks, pâtés, mayonnaise,
ensure that they do not play with
dressings etc. Use your mill (if
supplied) for milling herbs, nuts
Only use the appliance for its
and coffee beans.
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
Allow all liquids to cool to room
temperature before placing in the
before plugging in
Make sure your electricity supply is
Switch off and unplug:
the same as the one shown on the
before fitting or removing parts
underside of the machine.
Important – UK only
Keep hands and utensils out of the
The wires in the cord are coloured
blender when it's on the power
Blue = Neutral, Brown = Live.
Don't touch the sharp blades.
The appliance must be protected
Never use a damaged machine.
by a 3A approved (BS1362) fuse.
Get it checked or repaired: see
'service and customer care'.
Never use an unauthorised
For non-rewireable plugs the fuse
cover MUST be refitted when
Never leave the machine on
replacing the fuse. If the fuse cover
is lost then the plug must not be
When removing the blender or mill
used until a replacement can be
from the power unit:
obtained. The correct fuse cover is
wait until the blades have
identified by colour and a
replacement may be obtained from
don't accidentally unscrew the
your Kenwood Authorised Repairer
jug or jar from the blade unit.
Smoothie recipes - never blend
If a non-rewireable plug is cut off it
frozen ingredients that have
must be DESTROYED
formed a solid mass during
IMMEDIATELY. An electric shock
freezing, break it up before adding
hazard may arise if an unwanted
to the goblet.
non-rewireable plug is
Misuse of your blender can result
inadvertently inserted into a 13A
This appliance is not intended for
This appliance conforms to EC
use by persons (including children)
directive 2004/108/EC on
with reduced physical, sensory or
Electromagnetic Compatibility and
mental capabilities, or lack of
EC regulation no. 1935/2004 of
experience and knowledge, unless
27/10/2004 on materials intended
they have been given supervision
for contact with food.
or instruction concerning use of
before using for the first
the appliance by a person
responsible for their safety.
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
Don't put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with the
machine running, drop them
through one by one. Keep your
hand over the opening. Empty
Don't use the blender as a storage
mill (if supplied)
container. Keep it empty before
and after use.
Never blend more than 1 litre (1
pints) – less for frothy liquids like
to use your blender
Use for dry ingredients only.
1 Fit the sealing ring into the blade
When making mayonnaise, put all
2 Screw the jug onto the blade unit.
the ingredients, except the oil, into
3 Put your ingredients into the jug.
the blender. Then, with the
4 Put the filler cap in the lid, then
machine running, pour the oil into
the filler cap and let it run through.
5 Screw the lid onto the jug so that
Thick mixtures, eg pâtés and dips,
the thumb tab is over the handle.
may need scraping down. If it's
(To unscrew the lid, push the
difficult to process, add more
6 Place the blender onto the power
When crushing ice, add 15ml
unit and turn to lock
(1 tbsp) water to 6 ice cubes.
7 Switch on.
Operate the blender in short
blender and mill
to use your mill
To ensure long life of your blender,
never run it for longer than 60
1 Put your ingredients into the jar. Fill
seconds or the mill for longer than
it no more than half full.
30. Switch off as soon as you've
2 Fit the sealing ring into the blade
got the right consistency.
Don't process spices – they may
3 Turn the blade unit upside down.
damage the plastic.
Lower it into the jar, blades down.
The machine won't work if the
4 Screw the blade unit onto the jar
blender or mill is fitted incorrectly.
until it's finger-tight.
5 Place the mill onto the power unit
and turn to lock.
6 Switch on.
7 After milling, you can replace the
blade unit with the sprinkler lid and
shake out your food.
The sprinkler lid is not airtight.