Use your blender for soups,
Important – UK only
sauces, drinks, pâtés, mayonnaise,
The wires in the cord are coloured
dressings etc. Use your mill (if
supplied) for milling herbs, nuts
Blue = Neutral, Brown = Live.
and coffee beans.
The appliance must be protected
by a 3A approved (BS1362) fuse.
CAUTION: Blending very hot
For non-rewireable plugs the fuse
liquids may result in hot
cover MUST be refitted when
liquid and steam being
replacing the fuse. If the fuse cover
forced suddenly past the lid
is lost then the plug must not be
or filler cap. Allow the liquid
used until a replacement can be
to cool or reduce the
obtained. The correct fuse cover is
quantity and select a lower
identified by colour and a
speed if available. Protect
replacement may be obtained from
your hands with a cloth or
your Kenwood Authorised Repairer
oven gloves when handling
the hot goblet and lid.
If a non-rewireable plug is cut off it
Switch off and unplug:
must be DESTROYED
before fitting or removing parts
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable pug is inadvertently
Keep hands and utensils out of the
inserted into a 13A socket outlet.
blender when it's on the power
This machine complies with
European Economic Community
Don't touch the sharp blades.
Don't let children or infirm people
use the machine unsupervised.
before using for the first
Never use a damaged machine.
Get it checked or repaired: see
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
Never use an unauthorised
Never leave the machine on
Don't let children play with the
When removing the blender or mill
from the power unit:
wait until the blades have
don't accidentally unscrew the
mill (if supplied)
jug or jar from the blade unit.
Only use the machine for its
intended domestic use.
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
to use your blender
machine running, pour the oil into
the filler cap and let it run through.
1 Fit the sealing ring into the blade
Thick mixtures, eg pâtés and dips,
may need scraping down. If it's
2 Screw the jug onto the blade unit.
difficult to process, add more
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then
When crushing ice, add 15ml
(1 tbsp) water to 6 ice cubes.
5 Screw the lid onto the jug so that
Operate the blender in short
the thumb tab is over the handle.
(To unscrew the lid, push the
to use your mill
6 Place the blender onto the power
1 Put your ingredients into the jar. Fill
unit and turn to lock
it no more than half full.
7 Switch on.
2 Fit the sealing ring into the blade
blender and mill
3 Turn the blade unit upside down.
To ensure long life of your blender,
Lower it into the jar, blades down.
never run it for longer than 60
4 Screw the blade unit onto the jar
seconds or the mill for longer than
until it's finger-tight.
30. Switch off as soon as you've
5 Place the mill onto the power unit
got the right consistency.
and turn to lock.
Don't process spices – they may
6 Switch on.
damage the plastic.
7 After milling, you can replace the
The machine won't work if the
blade unit with the sprinkler lid and
blender or mill is fitted incorrectly.
shake out your food.
The sprinkler lid is not airtight.
Don't put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
Always switch off, unplug and
remove the filler cap; then, with the
dismantle before cleaning.
machine running, drop them
Never let the power unit, cord or
through one by one. Keep your
plug get wet.
hand over the opening. Empty
Empty the jug before unscrewing it
from the blade unit.
Don't use the blender as a storage
Don't wash any parts in your
container. Keep it empty before
and after use.
Never blend more than 1 litre (1
Wipe with a damp cloth, then dry.
pints) – less for frothy liquids like
Push excess cord inside the back
of the machine.
Use for dry ingredients only.
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Then, with the