System Board - HP Z200 Overview

QuickSpecs
System Technical Specifications

System Board

System Board Form Factor ATX 251.46 x 304.8 mm (9.9 x 12 inches)
Processor Socket
CPU Bus Speed
Chipset
Super I/O Controller
Memory Expansion Slots 4 DDR3 memory slots
Memory Type Supported
Memory Modes
Memory Speed Supported 1333MHz DDR3
Memory Protection
Memory
Maximum Memory
Memory Configuration
(Supported)
PCI Express Connectors
PCI Connectors (5.0V)
Supported Drive
Interfaces
Serial Attached SCSI
Integrated RAID
Single LGA 1156
DMI
Intel® PCH 3450
SMSC SCH5327, Rev B
DDR3, UDIMM (Unbuffered), ECC& nECC
Channel non-Interleaved
ECC available on data, parity on address and command
16GB
ECC DIMMs are supported, and support nEcc 1GBx1 configuration on Z200
1 PCI Express Gen2 slots x16 mechanical/ x16 electrical (used for discrete graphics)
1 PCI Express Gen1 slot x16 mechanical/x4 electrical
1 PCI Express Gen1 slot x4 mechanical/x1 electrical
1 PCI Express Gen1 slot x1 mechanical/x1 electrical
3 PCI
SATA
None
NOTE: Requires identical hard drives (speeds, capacity, interface)
DA - 13541 Worldwide — Version 20 — September 1, 2011
Integrated 6-channel SATA 3.0Gb/sec controller with RAID 0, 1,
5 and NCQ. (Factory integrated RAID is Microsoft Windows only)
RAID 5 is supported by Software XOR.
HP Z200 Workstation
Page 13