Table of Contents
Advertisement
Climate Control System
Using Automatic Climate Control
The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that will raise or lower
the interior temperature to your preference as quickly as possible.
Dashboard vents
Dashboard and
floor vents
AUTO Button
Driver's Side
Temperature
Control Dial
A/C (Air Conditioning) Button
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger's side control
dial.
3. Press the
button to cancel.
■
Switching between the recirculation and fresh air modes
Press the
button and switch the mode depending on environmental conditions.
Recirculation Mode (indicator on): Recirculates air from the vehicle's interior through
the system.
Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in
fresh air mode in normal situations.
Floor vents
Floor and
defroster vents
(Recirculation) Button
Passenger's Side
Temperature
Control Dial
/
(Fan Control) Bar
1Using Automatic Climate Control
If any buttons are pressed while using the climate
control system in AUTO, the function of the button
that was pressed will take priority.
The AUTO indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on AUTO, and setting the
temperature to low. Change the fresh mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
Pressing the
control system between on and off. When turned on,
the system returns to your last selection.
Continued
button switches the climate
165
Advertisement
Chapters
Table of Contents
