Honda 2014 Pilot Owner's Manual page 411

High-Mount Brake Light Bulb
When replacing, use the following bulb.
High-Mount Brake Light: 5 W
Lens Segment
Screw
Bulb
1. Remove the lens segment by prying on the
edge using a flat-tip screwdriver.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
2. Remove the screw under each lens.
3. Pull the high-mount brake light assembly
out of the vehicle.
4. Remove the two mounting screws from the
light assembly.
5. Remove the lens from the light assembly.
6. Remove the old bulb and insert a new bulb.
uu Replacing Light Bulbs u High-Mount Brake Light Bulb
409