■
Phone Setup
■
To pair a cell phone (when there is no
phone paired to the system)
1. Press the PHONE button or the
2. Rotate
to select Yes. Press
3. Put your cell phone in Discovery or Search
mode.
4. Select OK.
5. Select your phone in the list.
Select Phone Not Found? if your phone
u
is not found.
u
Refer to your phone manual for
instructions on searching for a
Bluetoothr device.
6. Enter the 4-digit pairing code on your
phone when prompted to complete the
pairing process.
uu
Bluetooth® HandsFreeLink®
1Phone Setup
Your Bluetooth-compatible phone must be paired to
HFL before you can make and receive hands-free
calls.
button.
You can control the HFL system using voice
.
commands.
2 HFL Menus P. 303
The maximum range between your phone and
vehicle is about 30 feet (10 meters).
Phone Pairing Tips
•
You cannot pair your phone while the vehicle is
moving.
•
Your phone must be in discovery or search mode
when pairing the phone. Refer to your phone's
manual.
•
Up to six phones can be paired.
•
Your phone's battery may drain faster when it is
paired to HFL.
•
If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and returns to idle.
•
The default pass-key "0000" is used until you
change the setting.
Pass-Key
You can change the pass-key setting.
2 To change the Pass-key setting P. 307
You can delete the paired phone.
2 To delete a paired phone P. 308
Continued
u
HFL Menus
305