Dual-Zone Climate Control System; Climate Control System; Using Automatic Climate Control - Honda ODYSSEY 2022 Owner's Manual

Climate Control System

Dual-zone climate control system

Using Automatic Climate Control

The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
Floor and
defroster
vents
A/C (Air Conditioning) Button
SYNC
(Synchronized)
Button
(On/Off)
Button
Temperature
Control Switch
AUTO Button
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the temperature control switch.
3. Press the
■
Switching between the recirculation and fresh air modes
Press the button and switch the mode depending on environmental
conditions.
Recirculation Mode (indicator on): Recirculates air from the vehicle's interior through
the system.
Fresh Air Mode (indicator off): Maintains outside ventilation. Keep the system in
fresh air mode in normal situations.
260
Floor vents Dashboard
and floor
vents
MODE Button
(Windshield Defroster) Button
button to cancel.
1Using Automatic Climate Control
During idle-stops, air-conditioning is suspended, and
only the blower remains active. If you do not want
air-conditioning suspended, press Auto Idle Stop OFF
button to cancel idle-stop.
If any buttons are pressed while using the climate
control system in auto, the function of the button
Dashboard
that was pressed will take priority.
vents
The AUTO indicator will go off, but functions
unrelated to the button that was pressed will be
controlled automatically.
(Recirculation)
To prevent cold air from blowing in from outside, the
Button
fan may not start immediately when the AUTO
Fan Control
button is pressed.
Switch
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
Pressing the
control system between on and off. When turned on,
the system returns to your last selection.
While ECON mode is active, the climate control
system may have reduced cooling performance.
button switches the climate