Climate Control System; Using Automatic Climate Control - Honda INTEGRA 2024 Owner's Manual

Climate Control System

Using Automatic Climate Control

The automatic climate control system maintains the interior temperature you select.
The system also selects the proper mix of heated or cooled air that raises or lowers
the interior temperature to your preference as quickly as possible.
Models with SYNC button
Dashboard
vents
Driver's Side
Temperature
Control Dial
(Recirculation) Button
Use the system when the engine is running.
1. Press the AUTO button.
2. Adjust the interior temperature using the driver's side or passenger's side
temperature control dial.
3. Press the (ON/OFF) button to cancel.
226
* Not available on all models
Dashboard Floor vents
and floor
vents
Fan Control Dial
AUTO Button
A/C (Air Conditioning) Button
(ON/OFF) Button
1Using Automatic Climate Control
Floor and
defroster
vents
Passenger's Side
Temperature
Control Dial
SYNC Button
If any buttons are pressed while using the climate
control system in auto, the function of the button
that was pressed will take priority.
The auto button indicator * /AUTO indicator
off, but functions unrelated to the button that were
pressed will be controlled automatically.
Models with Auto Idle Stop
During idle-stops, air-conditioning is suspended, and
only the blower remains active. If you do not want
air-conditioning suspended, press the Auto Idle Stop
OFF button to cancel idle-stop.
All models
To prevent cold air from blowing in from outside, the
fan may not start immediately when the AUTO
button is pressed.
If the interior is very warm, you can cool it down
more rapidly by partially opening the windows,
turning the system on auto, and setting the
temperature to low. Change the fresh air mode to
recirculation mode until the temperature cools down.
When you set the temperature to the lower or upper
limit, Lo or Hi is displayed.
* will go
OwnersManuals2.com