Indicator
Name
Daytime
Running Lights
Indicator
*
System Message
Indicator
*
A/T Temperature
Indicator
*
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
w , then goes off.
(
Comes on if there is a problem with
●
the DRL system.
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w , then goes off.
Comes on along with a beep when a
●
problem is detected. A system
message on the multi-information
display appears at the same time.
Comes on for a few seconds when
●
you turn the ignition switch to ON
w , then goes off.
(
Comes on when the transmission
●
fluid temperature is too high.
Explanation
Have your vehicle checked by a dealer.
●
2 Daytime Running Lights P. 127
While the indicator is on, press the
●
(information) button to see the
message again.
Refer to the Indicators information in this
●
chapter when a system message appears
on the multi-information display. Take
the appropriate action for the message.
The multi-information display does not return
●
to the normal screen unless the warning is
canceled, or the
/
(information)
button is pressed.
Comes on while driving - Stop in a safe
●
place, shift to
P , and idle the engine
(
until the indicator goes off.
uu
Indicators
u
Message
*
/
—
73
Continued