Bag Changing - Kenmore 16.23195C Owner's Manual

PIÈCES ET CARACTÉRISTIQUES
Il est important de connaître les pièces et les caractéristiques de l'aspirateur pour l'utiliser correctement et en
toute sécurité. Lire cette section avant de l'utiliser.
TUYAU & ACCERSORIES
Réglage de
Tube
la puissance
tèlescopique
d'aspiration
Tuyau
Encoche de raccordement
du tuyau
Suceur
plat
Brosse
mixte
Brosse à
plancher
Brosse a
moquette/
sol nu
4

BAG CHANGING

For best cleaning results, the dust bag
should be changed often.
NOTE: See PARTS AND FEATURES for
Bag Number.
1. Turn off and unplug vacuum cleaner from
wall outlet.
2. Remove hose from canister.
3. Press upward
on hood release
and lift canister
hood.
4. Disengage
cardboard tab from
red bag mount by
pulling away and
lifting up.
5. Pull bag out of the
red bag mount.
6. Check the motor safety filter and clean if
necessary.
Motor
Safety
Filter
Red Bag
Mount
7. The red bag mount will flip forward after
removing bag. This will prevent the hood
from closing until a new bag is installed.
Note: DO NOT bend or crease the
middle of the cardboard when installing
the bag into the bag mount slots.
8. Rotate red bag
mount down and
install bag into slots
as shown, pushing
down until the
cardboard tab locks
into position and the
holes align.
9. Tuck the bag securely into the bag
cavity so that none of it will be pinched by
the hood.
10. Close and latch canister hood.
11. Reinstall hose.
12. Plug cord into wall outlet.
CAUTION
NEVER REUSE A DUST BAG. Very fine
materials, such as carpet freshener,
face powder, fine dust, plaster, soot,
new carpet lint, etc. can clog the bag
and cause it to burst before it is full
and may cause damage to vacuum
cleaner motor. Change bag more often
when vacuuming these materials.
13