Attaching The Tripod; Attaching The Lens Cap - Panasonic HDC-Z10000 Operating Instructions Manual

≥ When attaching the microphone holder and the microphone holder adaptor, be sure to
tighten the screws firmly even though you might hear a squeaking sound.

∫ Attaching the tripod

≥ There are tripod mounting holes that are
compatible with 1/4-20UNC and 3/8-16UNC
screws. Use the size that matches the diameter of
the tripod's fixing screw.
≥ If you attach a tripod which has 5.5 mm screw or
larger, it may damage this unit.

∫ Attaching the lens cap

Protect the lens surface with the lens cap while the unit is not used.
∫ Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the audio input terminals 1, 2 (XLR 3 pin) is not used.
B INPUT terminal cap
Attach or remove it by pinching on it.
A Tripod receptacle
- 9 -