Table of Contents
Advertisement
[BASS SETTING]
Change the lower setting of the built-in microphone (5.1 ch) according to your choice.
≥ Set the [MIC SETUP] to [SURROUND] or [ZOOM MIC]. (l 50)
[0dB]/[+3dB]/[+6dB]/[LOWCUT]
≥ Normally set to [0dB].
≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level.
[2ch MIC ALC]
[ON]/[OFF]
≥ Set [MIC SETUP] to [2ch]. (l 50)
Distortion of the sound can be reduced when the built-in microphone (2 ch) or external
microphone is used by setting to [ON]. (
record with natural sound when set to [OFF].
≥ Adjust the audio control knobs (CH1, CH2) to adjust the audio input level.
[EXT. MIC GAIN1]
[-50dB]/[-60dB]
Sets the input level of the external microphone connected to the audio input terminal 1 (XLR
3 pin).
[EXT. MIC GAIN2]
[-50dB]/[-60dB]
Sets the input level of the external microphone connected to the audio input terminal 2 (XLR
3 pin).
is displayed on the recording screen) It will
- 115 -
Advertisement
Table of Contents
