Panasonic HDC-Z10000 Operating Instructions Manual page 136

High definition video camera
Hide thumbs Also See for HDC-Z10000:
Table of Contents

Advertisement

≥ When this unit or battery charger is
attached with the terminal part in a
deformed state, this unit or battery charger
may be damaged.
Do not throw old battery into fire.
≥ Heating a battery or throwing it into a fire
may result in an explosion.
If the operating time is very short even
after the battery has been recharged, the
battery has worn out. Please purchase a
new battery.
About the AC adaptor/battery
charger
≥ If the temperature of the battery is
extremely high or extremely low, charging
may take time or the battery may not be
charged.
≥ If the charging lamp keeps flashing, make
sure that the terminals of the battery or the
battery charger are not exposed to dirt,
foreign objects or dust, then reconnect
them properly.
Disconnect the AC cable from the AC
outlet when you remove dirt, foreign
objects or dust on the terminals of the
battery or the battery charger.
If the charging lamp is still flashing, the
temperature of the battery may be
extremely high or extremely low or
something may be wrong with the battery
or battery charger. Contact your dealer.
≥ If you use the AC adaptor or battery
charger near a radio, radio reception may
be disturbed. Keep the AC adaptor or
battery charger 1 m or more away from
the radio.
≥ When using the AC adaptor or battery
charger, it may generate whirring sounds.
However, this is normal.
≥ After use, be sure to disconnect the AC
cable from the AC outlet. (If you leave this
unit connected, the AC adaptor will
consume approximately 0.3 W and the
battery charger approximately 0.3 W of
current.)
≥ Always keep the electrodes of the AC
adaptor, battery charger and battery clean.
- 136 -

Advertisement

Table of Contents
loading

Table of Contents