Last Scene Delete; D Video Output Selection - Panasonic HDC-Z10000 Operating Instructions Manual

Last Scene Delete

The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥ It will return to recording screen without deleting by touching [NO].
≥ Last Scene Delete is not possible in following cases:
j When the unit is turned on/off
j When the mode switch is operated
j When the setting of [3D/2D REC MODE] or [REC FORMAT] is changed
j When the SD Card is inserted/removed
j During the interval recording

3D video output selection

It is possible to switch the destination of the 3D full high definition quality video output when
this unit is connected with the 3D compatible television that is compatible with the frame
sequential format using a HDMI cable (optional).
≥ Set [3D/2D REC MODE] to [3D]. (l 29)
Press USER button or touch USER button icon.
≥ It will switch every time the button is pressed or the button icon is touched. (Black screen is
displayed for few seconds.)
LCD # HDMI
LCD:
HDMI:
∫ To change the 3D video output selection when in the Playback Mode
≥ Change the mode to
Then, set [VIDEO/PICTURE] to [3D]. (l 72)
With the playback paused, press USER button or touch USER button icon.
≥ It is also possible to set with the menu. (l 86)
≥ This cannot be set during recording or playback.
≥ When the used TV is not compatible with the frame sequential format, it will not be picture
quality of 3D full high definition video even if it is set to HDMI.
3D video is displayed on the LCD monitor of this unit and the 3D
compatible TV. (The 3D video displayed on the TV will be a 3D
video in side-by-side format, and the picture quality will be
different from the 3D full high definition video.)
Displays 3D full high definition image on the 3D-compatible TV.
(2D image is displayed on the LCD monitor of this unit.)
and touch the play mode select icon.
- 67 -