Table of Contents
Advertisement
Recording
Iris adjustment
Perform Iris/Gain adjustments using the iris ring.
Adjust it when the screen is too bright or too dark.
A Gain value
B Iris value
C Auto iris icon
* It is displayed in Auto Iris Mode.
≥ Switch to Manual Mode. (l 39)
1
Press the IRIS A/M button to switch to Manual Iris Mode.
disappears.
≥
≥ The gain is displayed in dB.
2
Adjust the iris by rotating the iris ring.
Iris/Gain value:
CLOSE !# (F11 to F1.6) !# OPEN !# (0dB to 30dB)
≥ Value closer to CLOSE darken the image.
≥ Value closer to 30dB brighten the image.
≥ When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
≥ To return to Auto Iris Mode, press the IRIS A/M button.
≥ If the gain value is increased, the noise on the screen increases.
≥ Depending on the zoom magnification, there are iris values that are not displayed.
≥ When the [3D/2D REC MODE] setting is changed, this unit goes into standard Auto Iris
Mode (
).
MNL
F4.0
*
1 IRIS A/M button
2 Iris ring
- 47 -
IRIS A/M
Advertisement
Table of Contents
