Table of Contents
Advertisement
[LENS STATUS]
[ON]/[OFF]
Display relating to lens can be switched. (Zoom Display, Optical Image Stabilizer, Focus
Display, White Balance, Iris, Gain, Auto Iris, Shutter Speed, 3D Macro)
[CARD&BATTERY]
[ON]/[OFF]
Display can be switched between the remaining recordable time of the SD card and the
remaining battery capacity indication.
[OTHER DISPLAY]
[ON]/[OFF]
Display which remains displayed even when [USER BUTTON DISPLAY], [GUIDE LINES],
[SAFETY ZONE], [DATE/TIME], [LEVEL METER], [CONVERGENCE], [LENS STATUS] and
[CARD&BATTERY] are set to [OFF] can be switched.
[FACE FRAMING]
Detected faces appear with frames.
[OFF]:
Cancell the setting.
[PRIMARY]:
Only the prioritised face framing is displayed.
[ALL]:
All face detection framings are displayed.
≥ Up to 15 frames are indicated. Larger faces and faces nearer to the centre of the screen
take preference over others.
∫ Prioritised face framing
Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness
will be performed against the prioritised face framing.
≥ Prioritised face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.
≥ The white frame is for face detection only.
≥ It cannot be set while in the Interval Recording is used.
≥ In 3D Recording Mode, prioritised face framing is not displayed in following cases:
j 3D display is set to 3D display or MIX display (l 65)
j It is set to R-Image (l 65)
j During 3D display on a connected TV (l 85)
- 119 -
Advertisement
Table of Contents
