External Equipment Connection; Menu Functions - Packard Bell SLIM TV Owner's Manual

User's Guide
2.You can select the pages, which are colour coded along the bottom line with the same coloured buttons.
3.The VOL button can be used to select the preceding or following page.
S T
PECIAL ELETEXT FUNCTIONS
MENU
TEXT/MIX
SIZE
HOLD
INDEX
UPDATE
TIME
REVEAL
E
XTERNAL
You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.
A
NTENNA CONNECTION
1. Connect RF out on the VCR to the Antenna input on the rear of the TV.
2. Connect the antenna cable to the antenna in jack on the VCR.
3. Use the TV/AV button to select ant. source.
4. Press the PLAY button on the VCR.
SCART
JACK
1. Connect the Video outputs (Y Cb Cr) on a DVD to the SCART on the TV.
2. Use the SCART button to select SCART mode.
3. Press the PLAY button on the DVD.
A/V
INPUTS
1. Connect the A/V out jacks on a VCR to A/V-IN jacks on the TV.
2. Use the VIDEO button to select VIDEO mode.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the TV screen.
Note: If you have a mono VCR, connect the audio cable from the VCR to the A/V-IN socket of the set.
S-VIDEO
INPUT
If using an S-VIDEO source, the picture quality will be improved over a video source.
1. Connect the S-VIDEO output of a VCR to the S-VIDEO input on the TV.
2. Connect the audio cables from the S-VIDEO VCR to the L (MONO) R inputs on the TV.
3. Select S-VIDEO mode by pressing the S-VIDEO button.
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Changes Teletext mode / Only Teletext mode, text mode superimposed on the TV picture,TV mode
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
Stops the automatic page change, which will occur if a Teletext page consists of 2 or more sub pages.The
number of sub pages and the sub page displayed is, usually, shown on the screen below the time.When this
button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic
page change is inhibited.To continue press this button again.
Return to index page.
Displays the TV picture on the screen while waiting for the new Teletext page.The display will appear at
the top left hand corner of the screen.When the updated page is available then display will change to the
page number. Press this button to view the updated Teletext page.
When viewing a TV programme, press this button to display the time at the top right hand corner of the
screen. Press this button again to remove the display. In Teletext mode press this button to select and hold
or change a four-digit sub page number.This is displayed along the bottom of the screen. Press this button
again to exit this function.
Press this button to display the concealed information, such as solutions of riddles or puzzles.
Press this button again to remove the information from the display.
E
QUIPMENT
FUNCTIONS
C
ONNECTION
11
English