Roland EGX-20 User Manual page 6

Do not use with a damaged AC
adapter, power cord, or power-cord
plug or with a loose electrical outlet.
Use with any other
power supply may
lead to fire or
electrocution.
When not in use for several hours,
unplug the power-cord plug from the
electrical outlet.
Failure to do so may
result in danger of
shock, electrocution,
or fire due to
deterioration of the
electrical insulation.
Do not attempt to unplug the power-
cord plug with wet hands.
Doing so may
result in electrical
shock.
Install on a stable surface.
Failure to do so
may result in falling
of the unit, leading
to injury.
Do not inadvertently allow the
hands,or hair near the rotating parts
while in operation.
Doing so may result in injury.
When you're finished,
wash your hands to
rinse away all
cuttings.
4
Do not injure or modify the electrical
power cord, nor subject it to
excessive bends, twists, pulls,
binding, or pinching, nor place any
object of weight on it.
Doing so may
damage the
electrical power
cord, leading to
electrocution or
fire.
When unplugging the electrical
power cord from the power outlet,
grasp the plug, not the cord.
Unplugging by
pulling the cord
may damage it,
leading to fire or
electrocution.
Do not allow liquids, metal objects
or flammables inside the machine.
Such materials
can cause fire.
Do not touch the tip of the blade
with your fingers.
Doing so may result in injury.
Wear dust goggles and mask during
use.
Cutting dust
may scatter,
causing bodily
injury.