Specifications - Roland EGX-20 User Manual

--> The spindle motor may have reached the end of its service life. The spindle motor is a consumable part. As a general guide, we
recommend replacing it after every 1,000 hours.
Part of the carriage strikes the material while in the 3D Cutting mode.
--> The maximum cutting depth when in the 3D Cutting mode is 7 mm. Check whether you are attempting to create a relief larger than
this.
The cutter holder cannot be removed.
--> The cutter holder is reverse-threaded. Turn it clockwise to remove it.

Specifications

Main Unit Specifications
Table size
Table load weight
Carriage cutting range
Carriage operating speed
Cutting-depth control
Maximum cutting depth
Cuttable material
Resolution
Spindle motor
Spindle rotating speed
Overload detection feature
Cutter diameter
Interface
Buttons and controls
Indicators
Power supply
Power consumption
Operating noise level
External dimensions
Machine weight
Package external dimensions
Package weight
Operating environment
Included items and accessories
220 (W) x 170 (D) mm (8-5/8 (W) x 6-11/16 (D) in.)
Maximum 1 kg (2.2 1b.)
203.2 (X) x 152.4 (Y) x 31.8 (Z) mm (8 (X) x 6 (Y) x 1-1/4 (Z) in.)
X and Y axes: 0.1 to 1 mm/s, 1 to 15 mm/s (0.0039 to 0.59 in./s)
Z axis: 0.1 to 1 mm/s, 1 to 6 mm/s (0.0039 to 0.23 in./s)
AST (Active Surface Tracking) system
3D Cutting mode: 0.05 to 7 mm (0.002 to 0.27 in.)
Engraving mode: 0.05 to 1 mm (0.002 to 0.039 in.)
Composition: Resin (acrylic, modeling wax, ABS, polyacetal, polycarbonate, styrenefoam,
etc.), wood, and plaster
Maximum thickness: 30 mm (1-1/8 in.)
0.01 mm/step (0.00039 in./step)
12 W (DC motor)
4,000 to 15,000 rpm
Yes
3.175 mm (1/8 in.)
Parallel (compliant with IEEE 1284)
Movement button, (joystick type) Power button, View button, Origin Set button, Speed
control, and Spindle Speed control
Z-axis light, Power light, View light, and Origin Set light
Dedicated AC adapter
Input: AC 100 to 240 V 10%, 50/60 Hz
Output: DC 19 V, 2.1 A
Maximum during operation: 0.6 A at 100 V, 0.27 A at 240 V
Standby: Less than 45 dB (A)
No-load operation: Less than 70 dB (A) (according to ISO 7779)
515.2 (W) x 368.3 (D) x 270.6 (H) mm (20-5/16 (W) x 14-1/2 (D) x 10-5/8 (H) in.)
10.9 kg (24 1b.)
673 (W) x 518 (D) x 412 (H) mm (26-1/2 (W) x 20-3/8 (D) x16-1/4 (H) in.)
15.5 kg (34.2 1b.)
Temperature: 5 to 40 ºC (41 to 104 ºF)
Relative humidity: 35 to 80% (no condensation)
AC adapter, power cord, cutter, cutter holder, depth regulator noses (large and small), adhesive
sheet for mounting material, test-use plate material, hexagonal screwdriver, hexagonal
wrenches (large and small), Roland Software Package, User's Manual
6 Other Information
43