Roland EGX-20 User Manual page 23

Entering Text
Enter the text to engrave on the plate.
At the toolbar, click
1
Click the location in the engraving area where you want
2
to type in text, then enter the text using the keyboard.
Selecting the Font
Specify a font for the text string you entered.
At the toolbar, click
1
font you want to change.
The character cursor appears in the text string.
Alternatively, at the toolbar click
string whose font you want to change.
Points appear around the text string.
From the [Format] menu, select [Font].
2
The [Font Select] dialog box appears.
3
Clicking a font name displays the text in the preview
field with the font you chose, allowing you to find the
font you want.
After you have selected the font you want, click [OK].
4
In the [Font Select] dialog box, font names that start with "Plot" are stroke fonts.
See --> p. 24 "Stroke Fonts"
.
Engraving area
, then click the text string whose
, then click the text
3 Creating a Nameplate
Character cursor
Click a font name.
(Operations in the Engraving Mode)
Points
Preview
21