Connecting To The Computer - Roland EGX-20 User Manual

1 Getting Ready
Connecting the AC Adapter and Power Cord
Connect in the order of the numbers shown in the figure.
1
AC adapter jack
2
AC adapter
Power cord
3

Connecting to the Computer

To connect the machine and the computer, you can use either a parallel cable (IEEE 1284-compliant) .
The parallel cable is sold separately. Use a cable suited to the configuration of the printer port on your computer.
NOTICE
Make the cable connections while the computer and the machine are switched off.
Amphenol 36-pin connector
Computer
Printer port
9