Camera Function2 Screen - JVC TK-C655 Instructions Manual

Item
PRIVATE MASK.. This function grays out sections that are not to be displayed in the monitored picture
area.
The grayed out section moves accordingly when the camera is panned, tilted or when
the zoom is adjusted.
☞
P.32, "PRIVATE MASK Setup"

CAMERA FUNCTION2 Screen

This screen sets up the functions of the camera itself.
Item
AF FOR IR For setting whether to enable auto focusing automatically when switching between the
color and B&W modes.
OFF
ON
MEMO
As the camera is sensitive to both visible and near-IR light in the B&W mode, there may be
cases in which switching the color mode to the B&W mode causes the image to become out
of focus in certain light source conditions.
AUTO RETURN If the camera is not operated for a certain time after it has been operated manually on
RM-P2580, it will return to the status set at this item. The time setting for AUTO RE-
TURN to activate can be set under "RETURN TIME".
When setting this function, make sure that the rear DIP SWITCH4 of RM-P2580 is set to
"ON".
☞
P. 41, "AUTO RETURN Setup"
OFF
HOME
A.PAN KEY
A.PATROL KEY: Returns to the operation set at "RM.A.PATROL KEY" under [AUTO
MEMO
This function is only available for the product with model name RM-P2580(A) as on the
serial number plate. RM-P2580 without (A) will not function properly.
RETURN TIME For setting the time to activate AUTO RETURN.
Setting values :1 min, 2 min, 3 min, 5 min, 10 min, 20 min, 30 min, 60 min
MEMO
When "AUTO RETURN" is set to "OFF", "---" will be displayed and setting will be disabled.
Function & Setting
Function & Setting
: Turns this function off.
: Turns this function on.
: Turns this function off.
: Returns to the home position.
: Returns to the operation set at "RM.A.PAN KEY" under [AUTO PAN/
PATROL/TRACE Screen].
☞
P. 29, "RM.A. PATROL KEY"
PAN/PATROL/TRACE Screen].
☞
P. 29, "RM.A. PATROL KEY"
Initial Value
–
Initial Value
OFF
OFF
1min
23