Advanced Wlan Settings - Huawei E960 HSDPA User Manual

Enabling or Disabling the AP Isolation
On: The terminals (PCs) connecting to the gateway through the WLAN cannot access
each other.
Off: The terminals (PCs) connecting to the gateway through the WLAN can access each
other.
Selecting the WLAN Channel
Country: It is used to identify the country. Different countries have different standards
on channel usage.
Channel: It refers to the channel that the gateway works with. According to the
IEEE802.11 standard, the working frequency for the WLAN adopting the Direct
Sequence Spread Spectrum (DSSS) technology ranges from 2.4 GHz to 2.4835 GHz.
Each channel occupies a neighboring 22 MHz frequency band. The available channels
vary with the selected country. If you do not know which channel to select, select Auto
and the gateway can automatically search for the channel.
Configuring the 802.11 Mode
There are four available modes, as shown in the following table.
Mode
54g Auto
54g Performance
54g LRS
802.11b Only
Configuring the Transmission Rate
1. Select Auto, the E960 automatically searches the transmission rate. The maximum
WLAN transmission rate supported by the gateway is 54 Mbit/s.
2. Click
3. Click Advanced to configure the advanced WLAN setting.

Advanced WLAN Settings

You can configure the security and Network Bridge.
Configuring Security Key
A security key can protect your WLAN from illegal data attacking. The security key of your
wireless gateway must be consistent with that of the PC.
The WLAN has the best compatibility in this mode.
The WLAN has the best performance in this mode.
If the E960 has difficulties in communicating with devices
conforming to the IEEE 802.11b standards, select this mode.
The E960 can only work in the low performance 802.11b standard
network mode.
to submit the setting.
Description
37