Advanced Wlan Settings - Huawei E960 User Manual

Enabling or Disabling the AP Isolation
On: Th e terminals (PCs) connecting to the gateway through the WLAN cannot access
each other.
Off: The terminals (PCs) connecting to the gateway through the WLAN can access each
other.
Selecting the WLAN Channel
Country: It is used to identify the country. Different countries have different standard
on channel usage.
Channel: It refers to the channel that the gateway works with. According to the
IEEE802.11 standard, the working frequency for the WLAN adopting the Direct
Sequence Spread Spectrum (DSSS) technology ranges from
Each channel occupies a neighboring
vary with the selected country. If you do not know which channel to select, select
and the gateway can automatically search for the channel.
Confi guring the 802.11 Mode
T here are fo ur availabl
Mode
54g Auto
54g Performance
54g LRS
802.11b Only
Configur ing the T
1. Select Auto, the E960 automatically searches the transmission rate. The maximum
WLAN transmission rate supported by the gateway is 54 Mbit/s.
2. Click
3. Click Advanced to configure the advanced WLAN setting.
Advanced WLAN Set
You can configure the security and Network Bridge.
Configuring Security Key
A security key can protect your WLAN from illegal data attacking. The security key o
wireless gateway must be consistent with that of the PC.
e modes, as shown in the following table.
The WLAN has the best compatibility in this mode.
The WLAN has the best performance in this mode.
If the E960 has d
conforming to the
The E960 can only work in the low performance 802.11b standard
network mode.
ransmission Rate
to submit the setting.
tings
22 MHz frequency band. The available channels
Description
ifficulties in communicating with devices
IEEE 802.11b standards, select this mode.
2.4 GHz to 2.4835 GHz.
s
Auto
f your
27