Assigning Ip Addresses - Huawei E960 HSDPA User Manual

Hsdpa wireless gateway

Hide thumbs Also See for E960 HSDPA:

Table of Contents

In the dynamic host configuration protocol (DHCP) settings page, you can set the mode f

assigning I addresses in a LAN. DHCP automatically assigns IP addresses to the network

devices.

If y

ou are using the DHCP server, you need to do the following configurations on

the PC connecting with the gateway. For details

Click

to open the DHCP setting page.

IP Address: The default IP address of the gateway is 192.168.1.1.

Subnet Mask: The combination of the subnet mask and IP address enables the flexible

subnetting. By default, the subne

DHCP Server: It is used to assign IP addresses dynamically. If the DHCP server is

Enabled, it can automatically assign IP addresses for PCs. It is recommended to selec

Disabled for the DHCP server.

Start IP Address& End IP Address: It is used to define the IP address range that the

host can use during the IP address assignment. For example, in the network segment

192.168.1.0/24, the default IP address of the E960 is 192.168.1.1. The host IP address

can range from 192.168.1.2 to 192.168.1.254. The minimum range is a single IP addres

Assigning IP Addresses

, refer to "Configuring the PC Network."

t mask is 255.255.255.0.

Table of Contents