Configuring The Mac Filter - Huawei E960 HSDPA User Manual

Peer MAC Address: It refers to the physical address list of the remote peer bridges. It
contains a maximum of four physical addresses.
Link Status: Up shows the successful connection and Down shows the failed
connection.

Configuring the MAC Filter

Click to open the Wlan MAC Filter Settings window. You can control and manage
the clients accessing the WLAN, and improve the WLAN security performance.
MAC Restrict Mode
The following table lists the MAC address filter modes:
Value
Disabled The MAC address filter function is disabled.
Allow The clients with addresses in the MAC Address list are allowed to
connect with the gateway through the WLAN.
Deny The clients with addresses in the MAC Address list are not allowed to
connect with the gateway through the WLAN.
MAC Addresses
Enter MAC addresses in the list. The gateway can perform access control over the clients
that MAC addresses are in the list. The list can contain a maximum of 16 MAC addresses.
40
Description